Display the Default Directory on Fabric IPsec Gateway VM

About this task

Perform this procedure to display content in the default directory on the Fabric IPsec Gateway Virtual Machine (VM).

1. Enter Fabric IPsec Gateway Configuration mode:

   enable

   virtual-service WORD<1-128> console

   

   Note

   Type CTRL+Y to exit the console.

2. Display the configured directory:

   ls

Example

Displaying the configured directory on the VM.

Switch:1> enable
Switch:1# virtual-service figw console
Connected to domain figw
Escape character is ^Y

  <cr>
FIGW> ls
coupled.cfg